Mayra - Chrome Steel Horizontal Designer Radiator 1020mm x 550mm
|Pipe Centers||1110 mm|
|Wall to Pipe Centers||69 mm-84 mm|
|Wall Distance||140 mm-155 mm|
|Nett Weight||14,7 kg|
|Heat Outputs ΔT50||1132 Watts-3864 Btu|
|Maximum Working Pressure||10 bar|
|Maximum Working Temperature||95° C|
This astonishing Mayra - Chrome Steel Horizontal Designer Radiator 1020mm x 550mm, will keep your wall stylish and modern. Also can fit both modern and artisanal designs. This product was made to be the perfect asset on your wall. It is a great option to make your design match the idea you have got in mind. Customise it by sizing up or down sections to fit your needs or browse for different sizes available in stock. Do not forget to check oT piece for DUAL FUEL in Chrome" to use both, central heating and heating elements.
Get the complete set to install your designer radiator with ease. Remember! We are here to help. Contact us by connecting to our live chat on the bottom right corner of this page if necessary.
Choosing the right accessories for your Radiator or Towel Rail
The type of valves that you need will depend on the configuration of your pipework.
Towel rail / radiator has connections at the bottom:
You will need either angled or straight valves. Angled if your pipes are coming from the wall as this will provide a 90 degree angle up into the bottom of the towel rail / radiator, straight if your pipes are coming from the floor and just need to go straight up into the bottom of the towel rail / radiator.
If the towel rail / radiator has connections at the sides:
You will need either angled or corner valves, angled if your pipes are coming from the floor as this will provide a 90 degree angle into the side of the radiator. Corner Valves if your pipes are coming from the wall this will also give a 90 degree angle into the side of the radiator however is the neatest solution with this type of configuration.